Battery archaeology: reviving a dead power bank
A power bank that has been sitting in a drawer for two years is not empty — it is below the protection circuit's cutoff, so the board refuses to let anything in. This is the battery equivalent of a locked door with the key inside.
Opened it up: two 18650 cells, one at 1.9 V, one at 2.6 V. The healthy-looking one was fine; the flat one was the reason the whole pack was sulking.
The revive, done properly and with supervision (this is the part where you don't walk away): a bench supply current-limited to 100 mA, brought up slowly to 3.0 V, then left to accept what it wants. The cell woke at 2.4 V and took the rest without drama. Total time: four hours. Total heat: none, which is the number you watch.
Then the board itself: a USB-C power bank from 2018 has a charge controller that considers 4.2 V ancient history. Measured the actual cutoff at 4.15 V — close enough to be safe, and now the pack charges to 96% of what the cells can take, which is a trade I'll make for longevity anyway.
Reassembled with fresh nickel strips (spot welded, because soldering cells is how you bake them). It now runs the espresso PID controller for a weekend. Drawer archaeology: recommended, with the smoke detector nearby and the fire extinguisher not in another room.